Power Factor correction and harmonic filtering_萨科特电气集团广州钜铂电器有限公司

Capacitor banks
stock for immediate delivery >

PRODUCTS << Power Factor correction and harmonic filtering

Power Factor correction and harmonic filtering

Filter reactor

has a standard range of rejection reactors p = 7 %, with a resonance frequency of 189 Hz for 50 Hz networks (or on demand 227 Hz for 60 H
CIRKAP
CHV-T

The CHV-T Voltage capacitors are composed of different capacitive elements. These basic units are connected in series and parallel with the pu
RMV

Choke REACTORS are required to limit the transient currents produced during the connection of capacitors. CIRCUTOR's RMV units are encaps
LVC

The LVC contactor is a vacuum contactor prepared to control inductive and capacitive loads.
CHV-M

The CHV Medium Voltage capacitors are composed of different capacitive elements. These basic units are connected in series and parallel with the purpo
AFQ

AFQ multifunction parallel active filters are the most complete solution to solve those quality problems caused, in either industrial o
FARE-Q

FARE-Q filters have been designed for Power factor correction purposes in networks with an average harmonic distortion, i.e., in networks where the ob
FAR-Q

FAR-Q filters have been designed for Power factor correction purposes in networks with an average harmonic distortion, i.e., in networks where
LCL-TH

The LCL-TH filter is an LCL filter that is regulated through static switching operations (thyristors) and which has been specially designed to
LCL

LCL filters have been specially designed to eliminate the harmonics from the current absorbed by 6-pulse power converters, such as frequency v
FAR-H-AP57

FAR-H filters have been designed to reduce the level of harmonics in networks with a high current distortion rate. Therefore, the FAR-H absorp